Guides 12 Mar 2026 · 6 min read
FFP1, FFP2 or FFP3? How to choose the right protection class.
What each class filters, where it’s required, and the common mistakes to avoid on site.

EN 149 sorts filtering half masks into three classes by how much of the airborne particles they stop in testing: FFP1 at least 80 %, FFP2 at least 94 % and FFP3 at least 99 %.
Start with the hazard
Light, non-toxic nuisance dust is usually an FFP1 task. Fine dust, mist and many construction materials call for FFP2. Toxic dusts — including respirable crystalline silica — generally need FFP3.
Then check the fit
A respirator only protects when it seals. Facial hair, the wrong size and a loose nose clip are the most common reasons protection fails. Fit-test every wearer for each model they use.
Common mistakes
- Reusing a disposable (NR) respirator on a second shift.
- Choosing a valved model where exhaled air must be filtered.
- Relying on a respirator before dust extraction or water suppression.
Not sure which class you need? Use the selection guide or talk to a specialist.
Keep reading
30 Jan 2026 · 3 min read



